; Selector Channel diagnostic (D429A).
;   Parameter 1 = path to diagnostic tape.
;
; CPU memory size must be <= 512K to allow testing of XFERERR on illegal memory addresses.
;
; Configuration locations:
;
;     Location     Default Value  Contents
;   -------------  -------------  ---------------------------------------------------
;   DB+0   033510  000000         Switch Register setting
;   DB+1   033511  077400         Section Select Register setting
;   DB+2   033512  000000         Version and update level
;   DB+3   033513  000101     65  SCMB DRT number
;   DB+4   033514  023417   9999  Maximum error print count
;   DB+5   033515  000003      3  Clock DRT number
;   DB+6   033516  000000      0  Upper bank number (0-3 for 30036A, 0-15 for 30036B)
;   DB+7   033517  177777  65535  Upper address within upper bank (30036A only)


echo
echo
echo ------------------------
echo D429A - Selector Channel
echo ------------------------
echo
echo Loading the stand-alone loader.


; Cold load the I/O diagnostics tape.

attach -r MS0 %130000-11017_Rev-2640_IO.tape
boot MS0


; Load the tape file containing the diagnostic.
;
; The I/O tape contains these files:
;
;   DIAGNOSTIC             FILE    REV   %FILE
;   -------------------   ------  -----   ----
;   SLEUTH                PD411A  01.05   (01)
;   CART DISC-7905A       PD419A  01.04   (02)
;   MEMORY PATTERN        PD421A  01.00   (03)
;   MULTIPLEXOR CHAN      PD422A  01.02   (04)
;   DISC FILE-2888A       PD423A  01.00   (05)
;   CART DISC-7900A       PD424A  01.00   (06)
;   SYSTEM CLOCK  II/III  PD425A  01.00   (07)
;   SYS CLK/FLI   III-LC  PD426A  00.00   (10)
;   TERMINAL DATA         PD427A  01.01   (11)
;   FIXED HEAD DISC       PD428A  01.00   (12)
;   SELECTOR CHAN         PD429A  01.01   (13)
;   FLT.CORR.MEM  SER-II  PD430A  01.01   (14)
;   FLT.CORR.MEM  SER-III PD430B  00.00   (15)
;   EXTEND INSTRUC SET    PD431A  01.00   (16)
;   HSI DIAG.             PD432A  01.00   (17)
;   MAGNETIC TAPE         PD433A  01.04   (20)
;   SSLC INTERFACE        PD434A  01.03   (21)
;   ASLC INTERFACE        PD434B  01.04   (22)
;   UI DIAG               PD435A  01.01   (23)
;   TERMINAL CONTROL      PD438A  01.00   (24)
;   CALCOMP PLOTTER       PD439A  01.01   (25)
;   COBOLII A F/W DIAG    PD441A  00.00   (26)
;   COBOLII B F/W DIAG    PD442A  00.00   (27)
;   STAND ALONE DISC      SADUTIL 01.00   (30)

deposit SWCH 13


; Connect the SCMB to the selector channel.

set SCMB ENABLED
set SCMB SC


; Set the system clock into diagnostic mode.

set CLK REALTIME


; Load and start the diagnostic.
;
; The diagnostic loads from tape and then waits for a <CR>.

echo
echo Loading the diagnostic.
echo Expect halt 0 if successful.

reply "\r" delay 2 seconds
go


; Verify HALT 0 and respond to Q104 SELECT OPTIONS.

assert CIR=030360


; Set the Switch Register options:
;
; + bit  0 = select the external switch register
; + bit  1 = modify the Section Select Register
;   bit  2 = not used
;   bit  3 = not used
;   bit  4 = not used
;   bit  5 = loop on the current section
;   bit  6 = run in MUX mode for SCMB verification
;   bit  7 = output to the line printer (if configured)
;   bit  8 = not used
;   bit  9 = suppress non-error messages
;   bit 10 = suppress error messages
;   bit 11 = loop on the last step
;   bit 12 = halt on error
;   bit 13 = halt at the end of each step
;   bit 14 = halt at the end of each section
;   bit 15 = halt at the end of each diagnostic pass

deposit SWCH 140000

echo
echo Configuring the switch register.
echo Expect halt 1 if successful.
echo

go


; Verify HALT 1 and respond to Q110 SELECT SECTION OPTIONS.

assert CIR=030361


; Set the Section Select options:
;
; + bit  0 = reconfigure
; + bit  1 = execute section 1
; + bit  2 = execute section 2
; + bit  3 = execute section 3
; + bit  4 = execute section 4
; + bit  5 = execute section 5
; + bit  6 = execute section 6
; + bit  7 = execute section 7
;   bit  8 = not used
;   bit  9 = not used
;   bit 10 = not used
;   bit 11 = not used
;   bit 12 = not used
;   bit 13 = not used
;   bit 14 = not used
;   bit 15 = not used

deposit SWCH 177400

echo
echo Configuring the section select register.
echo Expect halt 2 if successful.
echo

go


; Verify HALT 2 and respond to Q111 RESTORE SELECT OPTIONS.

assert CIR=030362


; Set the Switch Register options:
;
; + bit  0 = select the external switch register
;   bit  1 = modify the Section Select Register
;   bit  2 = not used
;   bit  3 = not used
;   bit  4 = not used
;   bit  5 = loop on the current section
;   bit  6 = run in MUX mode for SCMB verification
;   bit  7 = output to the line printer (if configured)
;   bit  8 = not used
;   bit  9 = suppress non-error messages
;   bit 10 = suppress error messages
;   bit 11 = loop on the last step
; + bit 12 = halt on error
;   bit 13 = halt at the end of each step
;   bit 14 = halt at the end of each section
; + bit 15 = halt at the end of each diagnostic pass

deposit SWCH 100011


; Run the diagnostic.

echo
echo Reconfiguring the switch register and executing the diagnostic.
echo Expect halt 15 for successful completion.
echo


; Respond to "Q101 SET MAINT CARD DEV NUM? "

go until "? " ; reply "65\r"


; Respond to "Q102 SET TIMER/CONSOLE DEV NUM? "

go until "? " ; reply "3\r"


; Respond to "Q108 ENTER UPPER BANK # (DECIMAL) = "

go until ") = " ; reply "7\r"


; Respond to "Q105 ERR PRINT LIMIT? "

go until "? " ; reply "999\r"
go


; End the of diagnostic.
;
; Verify HALT 15 for a successful pass.

assert CIR=030375


; Restore the hardware configuration.

set SCMB DISABLED
set CLK  CALTIME