Logging to file "DIAG-DUS-III.log"


HP 3000 simulator V3.12-5.2 Release 13 delta 6 [32b data, 32b addresses, no Ethernet]

Configuring the simulation environment.



--------------------------------
HP 3000 Standalone DUS-III Suite
--------------------------------



----------------------------------------
GICDIAG - General I/O Channel Diagnostic
----------------------------------------

Loading the diagnostic.

Cold load complete, P: 001231 (LOAD P+14)

Configuring the diagnostic.

Executing the diagnostic.

GIC Diagnostic            Revision 1.26    
Type GO to continue (LC for List Commands)
>SWITCHES
>TEST 1/17,19/25
>GO
Set 'PROCESSOR' switch on GIC under test to 'CPU' ( in)
Set 'DEVICE TYPE' switch on GIC under test to 'A' ( in)
Set 'SYS CTRL' switch on GIC under test to 'ON'  ( in)
More than one Memory Controller installed in system?(Y/N)N

How many channels of all types are there installed? 2
Set Thumbwheel of GIC under test to channel 00
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 02
Respond 'GO'
>GO

Set 'PROCESSOR' switch on GIC under test to 'CPU' ( in)
Set 'DEVICE TYPE' switch on GIC under test to 'A' ( in)
Respond 'GO'
>GO

Set 'PROCESSOR' switch on GIC under test to 'CPP' (out)
Set 'DEVICE TYPE' switch on GIC under test to 'B' (out)
Respond 'GO'
>GO

Set 'SYS CTRL' switch on GIC under test to 'OFF' (out)
Respond 'GO'
>GO

Set 'SYS CTRL' switch on GIC under test to 'ON'  ( in)
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 03
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 04
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 05
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 06
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 07
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 08
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 09
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 10
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 11
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 13
Respond 'GO'
>GO

Set Thumbwheel of GIC under test to channel 14
Respond 'GO'
>GO

Set 'MODE' switch on GIC under test to 'TEST' (out)
Respond 'GO'
>GO

Set 'PROCESSOR' switch on GIC under test to 'CPU' ( in)
Respond 'GO'
>GO

Set 'MODE' switch on GIC under test to 'OPER' ( in)
Respond 'GO'
>GO

What is the channel number of second GIC? 12
Connect GIC under test to second GIC with interconnect cable
and no other device attached.

Set 'SYS CTRL' switch on GIC under test to 'OFF' (out)
Respond 'GO'
>GO

..................................................
GIC diagnostic pass 0001
Restore switches on GIC under test to original settings.
Replace system cables on GIC
GIC Diagnostic            Revision 1.26    
Type GO to continue (LC for List Commands)
>TEST 25
>GO
Set 'PROCESSOR' switch on GIC under test to 'CPU' ( in)
Set 'DEVICE TYPE' switch on GIC under test to 'A' ( in)
What is the CHANNEL address of GIC under test? 6
What is the channel number of second GIC? 9
Connect GIC under test to second GIC with interconnect cable
and no other device attached.
Respond 'GO'
>GO

..................................................
GIC diagnostic pass 0001
Restore switches on GIC under test to original settings.
Replace system cables on GIC
GIC Diagnostic            Revision 1.26    
Type GO to continue (LC for List Commands)
>EXIT
Restore switches on GIC under test to original settings.
Replace system cables on GIC
>


-----------------------------------
Diagnostic Utility System III Suite
-----------------------------------

Loading DUS-III.

Cold load complete, P: 001231 (LOAD P+14)

Configuring DUS-III.

Starting DUS-III.



Diagnostic/Utility System III Revision 01.01
Enter Your Program Name (type HELP for program information)
:


-----------------------------------
CS80DIAG - CS/80 Offline Diagnostic
-----------------------------------

Configuring the simulation environment.

Starting the diagnostic.

:CS80DIAG
CS/80 Offline Diagnostic Program (revision 0.11)
------------------------------------------------------------
IMB NUMBER 0
CHANNEL 11  ID=0      GENERAL I/O CHANNEL  (GIC)
  DEVICE 0 ID=!212   HP7933/35 DISC
------------------------------------------------------------

DEFAULT SECTIONS ARE 1-4, TYPE 'GO' TO CONTINUE
>TEST 1/5
>GO

SELECTED DATA DESTRUCTIVE TEST, SHOULD USE SCRATCH MEDIA
>GO
Start Section 1: GIC Test
End of Section 1

Start Section 2: Loopback Test 
End of Section 2

Start of Section 3: Selftest 
End of Section 3

Start Section 4: Status Test 
End of Section 4

Start Section 5: System Type Test
End of Section 5


End of pass 1

DEFAULT SECTIONS ARE 1-4, TYPE 'GO' TO CONTINUE
>EXIT


Diagnostic/Utility System III Revision 01.01
Enter Your Program Name (type HELP for program information)
:


--------------------------------------
DUS-III Diagnostics Suite Run Complete
--------------------------------------

Goodbye
Log file closed