; Load DUS-III from the tape.


; Set up the log(s).

set -N console log=DUS-III.log


; Establish the initial environment.

echo
echo Configuring the simulation environment.

set CPU III,512K,CIS

set console DEL=177

set IMBA ENABLED

set ADCC DISABLED

break delay 30 milliseconds


echo
echo
echo -----------------------------
echo Diagnostic Utility System III
echo -----------------------------
echo
echo Loading DUS-III.


; Cold load the DUS-III tape.

attach -e -r MS0 DUS-III.tape
boot MS0


echo
echo Configuring the diagnostic.

deposit SWCH 2


; Load and start the diagnostic.
;
; The diagnostic loads from tape and then waits for a <CR>.

echo
echo Starting the diagnostic.

reply "\r" delay 2 seconds
go