Logging to file "DIAG-SUITE.log" Run started on Mar 28, 2022 at 23:38:27 HP 2100 simulator V3.12-2.3 Release 31 delta 23 [32b data, 32b addresses, no Ethernet] ------------------------------- Diagnostic Configurator Pretest ------------------------------- Configuring the simulation environment. Loading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77756 (ALF,ALF) Verifying DSN 000200. Executing the diagnostic configurator pretest. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 02720 (CLC 0,C) Testing CPU and option detection. Configuring the CPU as a 2114 with DMA. 2114, DMA, NO MPRT, 16K MEMORY Configuring the CPU as a 2115 with DMA. 2115, DMA, 8K MEMORY Configuring the CPU as a 2116 with DMA and MPRT. 2116, DMA, MPRT, 32K MEMORY Configuring the CPU as a 2100 with DMA and MPRT. 2100, DMA, MPRT, 32K MEMORY Configuring the CPU as a 1000-M (21MX-M) with DMA and MPRT. 21MX M, DMA, MPRT, 32K MEMORY Configuring the CPU as a 1000-E (21MX-E) with DMA and MPRT. 21MX E, DMA, MPRT, 32K MEMORY Configuring the CPU as a 1000-F (21MX-F) with DMA and MPRT. 21MX E, DMA, MPRT, 32K MEMORY Detection tests complete. ------------------------- HP 1000 Diagnostics Suite ------------------------- Configuring the CPU as a 1000-E with 128K. Configuring the diagnostic configurator for magnetic tape loading. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) ----------------------------------------------- DSN 101100 - Memory Reference Instruction Group ----------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101100. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 03353 (JMP 130) ------------------------------------ DSN 101001 - Alter-Skip Instructions ------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101001. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 00633 (JMP 351) -------------------------------------- DSN 101002 - Shift-Rotate Instructions -------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101002. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 01726 (JMP 371) --------------------------------- DSN 102104 - Semiconductor Memory --------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 102104. Selecting the test set. Expect halt 102075 if successful. Programmed halt, T: 102075 (HLT 75), P: 02133 (SZA,RSS) Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 02127 (JMP 2023) ---------------------------------- DSN 101004 - EAU Instruction Group ---------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101004. Executing the diagnostic. Expect halt 102077 for successful completion. 2100 SERIES EAU DIAGNOSTIC END OF PASS 1 Programmed halt, T: 102077 (HLT 77), P: 02614 (JMP 2027) --------------------------------------------- DSN 101207 - Floating Point Instruction Group --------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101207. Executing the diagnostic. Expect halt 102077 for successful completion. 2100-21MX FLOATING POINT DIAGNOSTIC PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02115 (LDA 152) ------------------------------------ DSN 101206 - Power Fail/Auto Restart ------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101206. Executing the diagnostic. H0 2100 SERIES PWR FAIL DIAGNOSTIC Failing the CPU power. Expect halt 102006 to wait for power decay. Programmed halt, T: 102006 (HLT 6), P: 00570 (JMP 567) Restoring the CPU power. Expect halt 102077 for successful completion. H4 THERE HAVE BEEN 0001 TESTS OF THE POWER FAIL CIRCUITRY Programmed halt, T: 102077 (HLT 77), P: 00532 (JMP 424) ---------------------------------------- DSN 102305 - Memory Protect/Parity Error ---------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 102305. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02444 (JMP 2000) Selecting the test set. Expect halt 102075 if successful. MEMORY PROTECT-PARITY ERROR DIAGNOSTIC Programmed halt, T: 102075 (HLT 75), P: 02026 (STA 2315) Executing the diagnostic. Expect halt 102061 for user intervention. H061 POWER DOWN COMPUTER INSTALL JUMPERS PER TABLE 3-5 IN MOD POWER UP COMPUTER Programmed halt, T: 102061 (HLT 61), P: 02750 (LDA 254) [Jumpers changed, computer powered up, RUN pressed] Expect message "H314 PRESS HALT,PRESET AND RUN WITHIN 30 SECONDS". H314 PRESS HALT,PRESET AND RUN WITHIN 30 SECONDS [PRESET pressed, RUN pressed] Expect halt 102062 for user intervention. PASS 000001 H062 POWER DOWN COMPUTER SET JUMPERS TO INITIAL SETTINGS PER TABLE 3-1 IN MOD POWER UP COMPUTER Programmed halt, T: 102062 (HLT 62), P: 02155 (LDA 254) [Jumpers restored, computer powered up, RUN pressed] Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 02134 (LDA 2313) ---------------------------------- DSN 141203 - I/O Instruction Group ---------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 141203. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 01200 (JMP 1140,I) Executing the diagnostic. Expect halt 102033 for user intervention. I-O INSTRUCTION GROUP & CHANNEL OR EXTENDER DIAGNOSTIC DSN 141203 H033 SET S-REG TO 125252, PRESS RUN Programmed halt, T: 102033 (HLT 33), P: 00741 (JMP 732,I) [S-REG set, RUN pressed] Expect halt 102033 for user intervention. H033 SET S-REG TO 052525, PRESS RUN Programmed halt, T: 102033 (HLT 33), P: 00741 (JMP 732,I) [S-REG set, RUN pressed] Expect halt 102024 for user intervention. H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 05330 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02127 (LDA 456) -------------------------------------------- DSN 143300 - General Purpose Register (IPLI) -------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) -------------------------------------------- DSN 143300 - General Purpose Register (IPLO) -------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) ------------------------------------------- DSN 143300 - General Purpose Register (MC1) ------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) ------------------------------------------- DSN 143300 - General Purpose Register (MC2) ------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) ------------------------------------------- DSN 143300 - General Purpose Register (PTR) ------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) ------------------------------------------- DSN 143300 - General Purpose Register (PTP) ------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) -------------------------------------------------------------- DSN 101220 - Direct Memory Access/Dual-Channel Port Controller -------------------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101220. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 01541 (CLC 0,C) Executing the diagnostic. Expect halt 107024 for user intervention. DMA-DCPC DIAGNOSTIC H324 PRESS PRESET AND RUN Programmed halt, T: 107024 (HLT 24,C), P: 02312 (SFC 6) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 01671 (CLB) ----------------------------------------------- DSN 101011 - Extended Instruction Group (Index) ----------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101011. Executing the diagnostic. Expect halt 102077 for successful completion. EIG (INDEX) DIAGNOSTIC PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) --------------------------------------------------------- DSN 101112 - Extended Instruction Group (Word, Byte, Bit) --------------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101112. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02406 (JMP 2365,I) Executing the diagnostic. Expect halt 102077 for successful completion. EIG (WORD,BYTE,BIT) DIAGNOSTIC DSN 101112 PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02127 (LDA 207) ---------------------------------------------- DSN 101213 - M/E-Series Fast FORTRAN Package 1 ---------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101213. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02426 (JMP 2000) Executing the diagnostic. Expect halt 102077 for successful completion. START 21MX FFP DIAGNOSTIC 1 H110 ..MAP TEST H120 SNGL TEST H130 DBLE TEST H210 .DFER TEST H220 .XFER TEST H230 PWR2 TEST H240 .PACK TEST H250 FLUN TEST H260 .XPAK TEST H300 .XCOM TEST H310 ..DCM TEST H320 DDINT TEST H330 .CFER TEST PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ---------------------------------------------- DSN 101115 - M/E-Series Fast FORTRAN Package 2 ---------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101114. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect halt 102077 for successful completion. START 21MX FFP DIAGNOSTIC 2 H030 .GOTO TEST H050 .ENTR TEST H060 .ENTP TEST H100 .SETP TEST H115 XADD TEST H125 XSUB TEST H135 XMPY TEST H140 .XADD TEST H150 .XSUB TEST H160 .XMPY TEST H200 .XDIV TEST H215 XDIV TEST PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) --------------------------------- DSN 101121 - F-Series FPP-SIS-FFP --------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101121. Configuring the CPU as a 1000-F. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02465 (JMP 2426,I) Running the diagnostic. Expect halt 102077 if successful. FPP-SIS-FFP DIAGNOSTIC DSN 101121 BEGIN BASIC CONTROL TEST OVFL TEST CONF TEST BASE RETN TEST SIS1 RETN TEST SIS2 RETN TEST SIS3 RETN TEST FPP1 RETN TEST FFP2 RETN TEST FFP3 RETN TEST END BASIC CONTROL TEST LONG PASSES FIXS TEST FIXD TEST FLTS TEST FLTD TEST ADD TEST SUB TEST MPY TEST DIV TEST ACC TEST SIS1 TEST SIS2 TEST SIS3 TEST FFP1 TEST FFP2 TEST FFP3 TEST PASS 00001 Programmed halt, T: 102077 (HLT 77), P: 02150 (JSB 172,I) ---------------------------------- DSN 102103 - Memory Expansion Unit ---------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 102103. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02435 (JMP 2000) Selecting the test set. Expect halt 102075 if successful. MEMORY EXPANSION MODULE DIAGNOSTIC, DSN = 102103 Programmed halt, T: 102075 (HLT 75), P: 02031 (NOP) Executing the diagnostic. Expect message "H115 PRESS HALT-PRESET-RUN IN LESS THAN 10 SECONDS". H115 PRESS HALT-PRESET-RUN IN LESS THAN 10 SECONDS [PRESET pressed, RUN pressed] Expect halt 102024 for user intervention. H117 PRESET TEST COMPLETE H327 00128K OF CONTIGUOUS MEMORY INSTALLED H024 PRESS PRESET, RUN Programmed halt, T: 102024 (HLT 24), P: 03264 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BI-O COMP PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02127 (LDA 2256) -------------------------------- DSN 103301 - Time Base Generator -------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 103301. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02436 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. TBG DIAGNOSTIC, DSN = 103301 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03265 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BI-O COMP H030 TEST 01 IN PROGRESS H030 TEST 02 IN PROGRESS H030 TEST 03 IN PROGRESS H030 TEST 04 IN PROGRESS H030 TEST 05 IN PROGRESS H030 TEST 06 IN PROGRESS H030 TEST 07 IN PROGRESS H030 TEST 10 IN PROGRESS H030 TEST 11 IN PROGRESS H030 TEST 12 IN PROGRESS PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02127 (LDA 2256) --------------------------------- DSN 103115 - Privileged Interrupt --------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 103115. Configuring the diagnostic for the first run. Expect halt 102070 if successful. Programmed halt, T: 102070 (HLT 70), P: 00502 (JMP 130,I) Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02471 (JMP 2000) Executing the diagnostic. Expect halt 102032 for user intervention. 12936 PRIVILEGED INTERRUPT CARD DIAGNOSTIC H032 PRESS PRESET(EXT), RUN Programmed halt, T: 102032 (HLT 32), P: 02145 (JMP 2135,I) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02126 (LDA 2257) Configuring the diagnostic for the second run. Expect halt 102070 if successful. Programmed halt, T: 102070 (HLT 70), P: 00502 (JMP 130,I) Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02471 (JMP 2000) Executing the diagnostic. Expect halt 102032 for user intervention. 12936 PRIVILEGED INTERRUPT CARD DIAGNOSTIC H032 PRESS PRESET(EXT), RUN Programmed halt, T: 102032 (HLT 32), P: 02145 (JMP 2135,I) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02126 (LDA 2257) Configuring the diagnostic for the third run. Expect halt 102070 if successful. Programmed halt, T: 102070 (HLT 70), P: 00502 (JMP 130,I) Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02471 (JMP 2000) Executing the diagnostic. Expect halt 102032 for user intervention. 12936 PRIVILEGED INTERRUPT CARD DIAGNOSTIC H032 PRESS PRESET(EXT), RUN Programmed halt, T: 102032 (HLT 32), P: 02145 (JMP 2135,I) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02126 (LDA 2257) Configuring the diagnostic for the fourth run. Expect halt 102070 if successful. Programmed halt, T: 102070 (HLT 70), P: 00502 (JMP 130,I) Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02471 (JMP 2000) Executing the diagnostic. Expect halt 102032 for user intervention. 12936 PRIVILEGED INTERRUPT CARD DIAGNOSTIC H032 PRESS PRESET(EXT), RUN Programmed halt, T: 102032 (HLT 32), P: 02145 (JMP 2135,I) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02126 (LDA 2257) ------------------------------------------- DSN 143300 - General Purpose Register (PIF) ------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143300. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02461 (JMP 2000) Selecting the test set. Expect halt 102075 if successful. GENERAL PURPOSE REGISTER DIAGNOSTIC, DSN 143300 Programmed halt, T: 102075 (HLT 75), P: 02026 (STA 2277) Executing the diagnostic. Expect halt 102024 for user intervention. H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03311 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BASIC I-O COMPLETED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2275) --------------------------------------------------- DSN 103110 - 12920A Asynchronous Multiplexer (Data) --------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 103110. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. ASYNC MULTIPLEXER DATA BOARD DIAGNOSTIC DSN 103110 H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BI-O COMP PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02116 (LDA 2245) ------------------------------------------------------ DSN 103011 - 12920A Asynchronous Multiplexer (Control) ------------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 103011. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. ASYNC MULTIPLEXER CONTROL BOARD DIAGNOSTIC H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BI-O COMP PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ---------------------------------------- DSN 103017 - 12966 Asynchronous Data Set ---------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 103017. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. BUFFERED ASYNC COMM INTFC DIAG H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BI-O COMP PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------------- DSN 103024 - 12821 ICD Disc Interface ------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 103024. Configuring the diagnostic. *** HPIB 12821A DIAGNOSTIC *** INSTRUCTIONS: 1. ENTER ? WHEN YOU NEED MORE INFORMATION. 2. INDICATE OCTAL VALUES BY A FINAL B (E.G. 13B). 3. SET SR BIT 15 ON TO LOOP ON DIAGNOSTIC, TOGGLE ON,OFF TO BREAK OUT OF A SINGLE TEST LOOP (CONVERSATIONAL-MODE). 4. SET SR BIT 14 TO SUPPRESS PRESET TEST 5. SET SR BIT 13 T0 PRINT ONLY ERROR MESSAGES (EXCEPT CONFIGURATION MESSAGES). 6. SET SR BIT 12 TO DELAY 1 SECOND BETWEEN TESTS IS THE FIRST CARD IN SELECT CODE 43B? IF YES, INPUT CARRIAGE RETURN OTHERWISE, INPUT THE CORRECT SELECT CODE.. [CR entered] INPUT THE LAST OCTAL DIGIT OF THE BUS ADDRESS (0-7 DERIVED FROM S1-S3) ... 5 IS THE SECOND CARD IN SELECT CODE 44B? IF YES, INPUT CARRIAGE RETURN IF NO SECOND CARD, INPUT 77B IF DIAGNOSTIC GUESSED INCORRECTLY AND THERE IS A SECOND CARD, ENTER CORRECT SELECT CODE... [CR entered] INPUT THE LAST OCTAL DIGIT OF THE BUS ADDRESS (0-7 DERIVED FROM S1-S3) ... 7 PROGRAM OPTIONS: CR - CARRIAGE RETURN- (DEFAULT) EXECUTE DIAG. FROM TEST 0. N - BEGIN EXECUTION FROM TEST N LN - LOOP ON TEST N (TOGGLE SW BIT 15 TO REGAIN CONTROL) E - EXIT PROGRAM WITH HLT77 (PRESS RUN TO RE-ENTER PROGRAM) F - FORCE TESTING TO SECOND BOARD G - GO BACK AND RETEST BOARD ONE R - GO BACK TO RECONFIGURATION SECTION ? [CR entered] Executing the diagnostic. Expect message "PRESS HALT,PRESET,RUN WITHIN 10 SECONDS !". PRESS HALT,PRESET,RUN WITHIN 10 SECONDS ! [PRESET pressed, RUN pressed] Expect message "TESTING COMPLETED ON SELECT CODE 43B". followed by "PRESS HALT,PRESET,RUN WITHIN 10 SECONDS !". TESTING COMPLETED ON SELECT CODE 43B PRESS HALT,PRESET,RUN WITHIN 10 SECONDS ! [PRESET pressed, RUN pressed] Expect message "TESTING COMPLETED ON SELECT CODE 44B". followed by "(T15)..DI TO HP-IB TO DI TEST PASSES !". Then expect halt 102077 for successful completion. TESTING COMPLETED ON SELECT CODE 44B (T15)..DI TO HP-IB TO DI TEST PASSES ! ? E Programmed halt, T: 102077 (HLT 77), P: 00345 (JMP 1563) ------------------------ DSN 104003 - Teleprinter ------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 104003. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Selecting the test set. Expect halt 102075 if successful. START TTY DIAGNOSTIC Programmed halt, T: 102075 (HLT 75), P: 02022 (NOP) Executing the diagnostic. Expect halt 102024 for user intervention. H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102030 for user intervention. H025 BI-O COMP H030 TURN TTY PUNCH ON PRESS RUN Programmed halt, T: 102030 (HLT 30), P: 02136 (JMP 2127,I) [Punch on, RUN pressed] Expect halt 102045 for user intervention. H045 TURN TTY PUNCH OFF PRESS RUN Programmed halt, T: 102045 (HLT 45), P: 02136 (JMP 2127,I) [Punch off, RUN pressed] !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ !"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_ INPUT THE FOLLOWING: 1 2 3 4 5 6 7 8 9 0 : - Q W E R T Y U I O P A S D F G H J K L ; Z X C V B N M , . / SHIFT+ ! " # $ % & ' ( ) * = _ @ + ^ < > ? CNTRL+ WRU TAPE NTAP XOFF EOT RU BELL TAB VT FORM RBOT CR LF INPUT ANY KEY I N P U T 040 T E S T [Switch bit 1 set] [Switch bit 1 cleared] H044 INPUT TERMINATED ECHO MODE ANY INPUT IS ECHOED INPUT TEST [Switch bit 1 set] [Switch bit 1 cleared] Expect message "H044 INPUT TERMINATED" and halt 102077 for successful completion. H044 INPUT TERMINATED PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) --------------------------------------------------- DSN 151302 - 7900/01 Cartridge Disc (multiple unit) --------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 151302. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 12307 (JMP 12310,I) Configuring the test parameters. H0 7900/7901 CARTRIDGE DISC MEMORY DIAGNOSTIC H24 CYLINDER TABLE 000,001,002,004,008,016,032,064,128,202 H25 WISH TO CHANGE? NO H27 PATTERN TABLE 000000 177777 125252 052525 007417 170360 162745 163346 155555 022222 H25 WISH TO CHANGE? NO H62 TYPE A FOR HEADS 0,1;B FOR 2,3;C FOR ALTERNATELY 0,1 THEN 2,3 C H23 00020 ERRORS/PASS ALLOWED H25 WISH TO CHANGE? NO H37 UNIT TABLE/ 01 DRIVE(S); 0 H25 WISH TO CHANGE? YES H34 ENTER UNIT NUMBERS(0-3)SEPARATED BY COMMAS 0,1,2,3 H37 UNIT TABLE/ 04 DRIVE(S); 0 1 2 3 H25 WISH TO CHANGE? NO Executing the diagnostic. Expect message "H65 LONG PASS 0008,HEADS 2/3,UNIT 03, 0000 ERRORS,MULTI-DRIVE" H65 LONG PASS 0001,HEADS 0/1,UNIT 00, 0000 ERRORS H65 LONG PASS 0002,HEADS 0/1,UNIT 01, 0000 ERRORS H65 LONG PASS 0003,HEADS 0/1,UNIT 02, 0000 ERRORS H65 LONG PASS 0004,HEADS 0/1,UNIT 03, 0000 ERRORS,MULTI-DRIVE H65 LONG PASS 0005,HEADS 2/3,UNIT 00, 0000 ERRORS H65 LONG PASS 0006,HEADS 2/3,UNIT 01, 0000 ERRORS H65 LONG PASS 0007,HEADS 2/3,UNIT 02, 0000 ERRORS H65 LONG PASS 0008,HEADS 2/3,UNIT 03, 0000 ERRORS,MULTI-DRIVE ------------------------------------------------------ DSN 151302 - 7900/01 Cartridge Disc (user interaction) ------------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 151302. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 12307 (JMP 12310,I) Executing the diagnostic. Expect halt 102002 for user intervention. H0 7900/7901 CARTRIDGE DISC MEMORY DIAGNOSTIC H66 SET OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03201 (JSB 1430) [RUN pressed] Expect message "E64 STATUS IS 000000 SHOULD BE 000010" and halt 102001. H46 READ IN STEP 04 E64 STATUS IS 000000 SHOULD BE 000010 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 12136 (JMP 12000,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000010" and halt 102001. H22 CYCLIC CHECK IN STEP 04 E64 STATUS IS 000000 SHOULD BE 000010 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0001 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 12136 (JMP 12000,I) Resuming from error. Expect halt 102002 for user intervention. H67 CLEAR OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03241 (JSB 1430) [RUN pressed] Expect message "E64 STATUS IS 000000 SHOULD BE 000031" and halt 102001. H46 READ IN STEP 07 E64 STATUS IS 000000 SHOULD BE 000031 H51 CYL 0001 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 12136 (JMP 12000,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000011" and halt 102001. H45 WRITE IN STEP 08 E64 STATUS IS 000000 SHOULD BE 000011 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 12136 (JMP 12000,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000011" and halt 102001. H36 INITIALIZE DATA IN STEP 09 E64 STATUS IS 000000 SHOULD BE 000011 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 6144 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 12136 (JMP 12000,I) Resuming from error. Expect halt 102002 for user intervention. H66 SET OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03312 (JSB 1430) [RUN pressed] Expect halt 102002 for user intervention. H67 CLEAR OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03347 (JSB 1430) [RUN pressed] Expect halt 102002 for user intervention. H70 UNLOAD UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03364 (JSB 1430) [Unit unloaded, RUN pressed] Expect message "H40 PROTECT U/D THEN READY UNIT 0". H40 PROTECT U/D THEN READY UNIT 0 [U/D protected, unit readied, RUN pressed] Expect halt 102002 for user intervention. H41 CLEAR U/D PROTECT,LOAD,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03526 (JSB 731) [U/D protect cleared, RUN pressed] Expect halt 102002 for user intervention. H71 PRESS PRESET(S) THEN PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 03551 (JSB 731) [PRESET pressed, RUN pressed] Expect message "H65 SHORT PASS 0001,HEADS 0/1,UNIT 00, 0005 ERRORS". H65 SHORT PASS 0001,HEADS 0/1,UNIT 00, 0005 ERRORS ----------------------------------------------- DSN 151403 - 7905/06/20/25 Disc (multiple unit) ----------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 151403. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 30174 (JMP 1777) Configuring the test parameters. H0 79XX/13037 DISC MEMORY DIAGNOSTIC H37 UNIT TABLE: 01 DRIVE(S); 0 H25 WISH TO CHANGE? YES H34 ENTER UNIT NUMBERS(0-7)SEPARATED BY COMMAS 0,1,2,3,4,5,6,7 H37 UNIT TABLE: 08 DRIVE(S); 0 1 2 3 4 5 6 7 H25 WISH TO CHANGE? NO ENTER:(U)NIT,(?) ERRS,(H)EAD,(O)UTPUT,(P)ATT,(S)OFT,(C)YL,(M)CPU,(E)XIT H H62 HEAD TABLE; UNIT 0 7905A , 02 HEAD(S) 0 1 H62 HEAD TABLE; UNIT 1 7906A , 02 HEAD(S) 0 1 H62 HEAD TABLE; UNIT 2 7920A , 05 HEAD(S) 0 1 2 3 4 H62 HEAD TABLE; UNIT 3 7925A , 09 HEAD(S) 0 1 2 3 4 5 6 7 8 H62 HEAD TABLE; UNIT 4 7905A , 02 HEAD(S) 0 1 H62 HEAD TABLE; UNIT 5 7906A , 02 HEAD(S) 0 1 H62 HEAD TABLE; UNIT 6 7920A , 05 HEAD(S) 0 1 2 3 4 H62 HEAD TABLE; UNIT 7 7925A , 09 HEAD(S) 0 1 2 3 4 5 6 7 8 H25 WISH TO CHANGE? YES H132 TYPE UNITS YOU WISH TO CHANGE SEPERATED BY COMMAS 0,1,4,5 H62 HEAD TABLE; UNIT 0 7905A , 02 HEAD(S) 0 1 H106 ENTER HEADS SEPARATED BY COMMAS 0,1,2 H62 HEAD TABLE; UNIT 0 7905A , 03 HEAD(S) 0 1 2 H25 WISH TO CHANGE? NO H62 HEAD TABLE; UNIT 1 7906A , 02 HEAD(S) 0 1 H106 ENTER HEADS SEPARATED BY COMMAS 0,1,2,3 H62 HEAD TABLE; UNIT 1 7906A , 04 HEAD(S) 0 1 2 3 H25 WISH TO CHANGE? NO H62 HEAD TABLE; UNIT 4 7905A , 02 HEAD(S) 0 1 H106 ENTER HEADS SEPARATED BY COMMAS 0,1,2 H62 HEAD TABLE; UNIT 4 7905A , 03 HEAD(S) 0 1 2 H25 WISH TO CHANGE? NO H62 HEAD TABLE; UNIT 5 7906A , 02 HEAD(S) 0 1 H106 ENTER HEADS SEPARATED BY COMMAS 0,1,2,3 H62 HEAD TABLE; UNIT 5 7906A , 04 HEAD(S) 0 1 2 3 H25 WISH TO CHANGE? NO ENTER:(U)NIT,(?) ERRS,(H)EAD,(O)UTPUT,(P)ATT,(S)OFT,(C)YL,(M)CPU,(E)XIT E Executing the diagnostic. Expect messages "H121 WARNING-FORMAT SWITCH OFF" and "H65 LONG PASS 0008,HEAD 012345678,UNIT 7,0000 ERRORS-0000 SOFT,MULTI-UNIT" H121 WARNING-FORMAT SWITCH OFF H65 LONG PASS 0001,HEAD 012 ,UNIT 0,0000 ERRORS-0000 SOFT H65 LONG PASS 0002,HEAD 0123 ,UNIT 1,0000 ERRORS-0000 SOFT H65 LONG PASS 0003,HEAD 01234 ,UNIT 2,0000 ERRORS-0000 SOFT H65 LONG PASS 0004,HEAD 012345678,UNIT 3,0000 ERRORS-0000 SOFT H65 LONG PASS 0005,HEAD 012 ,UNIT 4,0000 ERRORS-0000 SOFT H65 LONG PASS 0006,HEAD 0123 ,UNIT 5,0000 ERRORS-0000 SOFT H65 LONG PASS 0007,HEAD 01234 ,UNIT 6,0000 ERRORS-0000 SOFT H65 LONG PASS 0008,HEAD 012345678,UNIT 7,0000 ERRORS-0000 SOFT,MULTI-UNIT -------------------------------------------------- DSN 151403 - 7905/06/20/25 Disc (user interaction) -------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 151403. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 30174 (JMP 1777) Executing the diagnostic. Expect halt 102002 for user intervention. H0 79XX/13037 DISC MEMORY DIAGNOSTIC H37 UNIT TABLE: 01 DRIVE(S); 0 H25 WISH TO CHANGE? NO H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03335 (JSB 1212) [FORMAT switch set, RUN pressed] Expect message "H46 READ IN STEP 04" and halt 102001. H46 READ IN STEP 04 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" START 0000/00/00-LAST 0000/00/01 WORD COUNT 00128,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H22 VERIFY IN STEP 04" and halt 102001. H22 VERIFY IN STEP 04 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" START 0000/00/00-LAST 0001/00/00 WORD COUNT 00048,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect halt 102002 for user intervention. H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03402 (JSB 1167) [FORMAT switch cleared, RUN pressed] Expect message "H46 READ IN STEP 07" and halt 102001. H46 READ IN STEP 07 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 0 0 0 0 0 0 SHOULD BE 0 0 1 10001 XXXX XXXX / 0 000010 0 0 0 0 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "DEFECTIVE TRK " START 0001/00/00-LAST 0001/00/01 WORD COUNT 00128,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H45 WRITE IN STEP 08" and halt 102001. H45 WRITE IN STEP 08 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 0 0 0 0 0 0 SHOULD BE 0 1 0 10110 XXXX XXXX / 0 000010 0 0 0 0 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "WRT PROTEC TRK" START 0000/00/00-LAST 0000/00/01 WORD COUNT 00128,OLD CYL 0001,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect halt 102002 for user intervention. H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03452 (JSB 1167) [FORMAT switch set, RUN pressed] Expect message "H45 WRITE IN STEP 10" and halt 102001. H45 WRITE IN STEP 10 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 1 0 00000 XXXX XXXX / 0 000010 0 0 0 1 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" START 0000/00/00-LAST 0000/00/08 WORD COUNT 01024,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect halt 102002 for user intervention. H70 UNLOAD UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03566 (JSB 1167) [Unit unloaded, RUN pressed] Expect message "H107 READY UNIT 0". H107 READY UNIT 0 [Unit readied] Expect halt 102002 for user intervention. H142 PROTECT U/D,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03706 (JSB 1167) [U/D protected, RUN pressed] Expect halt 102002 for user intervention. H143 CLEAR U/D PROTECT,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03773 (JSB 1167) [U/D protect cleared, RUN pressed] Expect halt 102002 for user intervention. H110 PRESS PRESET(S),PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 04027 (CLF 34) [PRESET pressed, RUN pressed] Expect message "H46 READ IN STEP 38" and halt 102001. H46 READ IN STEP 38 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 0 0 00111 0000 0000 / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "CYL CMP ERROR " START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H46 READ IN STEP 39" and halt 102001. H46 READ IN STEP 39 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 0 0 01001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "HD/SEC CMP ERR" START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H46 READ IN STEP 40" and halt 102001. H46 READ IN STEP 40 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 0 0 01001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "HD/SEC CMP ERR" START 0000/00/01-LAST 0000/00/03 WORD COUNT 00138,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H46 READ IN STEP 41" and halt 102001. H46 READ IN STEP 41 E47 DATA WORD 0065 IS 075126 SHOULD BE 030400 E47 DATA WORD 0066 IS 000762 SHOULD BE 030400 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 0 0 01111 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "POSS CORR DATA" START 0000/00/00-LAST 0000/00/03 WORD COUNT 00128,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H46 READ IN STEP 42" and halt 102001. H46 READ IN STEP 42 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 0 0 01000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "UNCOR DATA ERR" START 0000/00/00-LAST 0000/00/03 WORD COUNT 00276,OLD CYL 0000,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H22 VERIFY IN STEP 43" and halt 102001. H22 VERIFY IN STEP 43 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 0 0 1 10001 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "DEFECTIVE TRK " START 0016/00/00-LAST 0017/00/00 WORD COUNT 00048,OLD CYL 0128,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H22 VERIFY IN STEP 43" and halt 102001. H22 VERIFY IN STEP 43 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 1 0 0 10000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" SHOULD BE "SPR TRK ACCESS" START 0128/01/00-LAST 0129/01/00 WORD COUNT 00048,OLD CYL 0016,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H45 WRITE IN STEP 43" and halt 102001. H45 WRITE IN STEP 43 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0128,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H46 READ IN STEP 43" and halt 102001. H46 READ IN STEP 43 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0016,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H46 READ IN STEP 43" and halt 102001. H46 READ IN STEP 43 E47 DATA WORD 0000 IS 156164 SHOULD BE 144300 E47 DATA WORD 0001 IS 023302 SHOULD BE 117306 E47 DATA WORD 0002 IS 114642 SHOULD BE 045322 H135 S P D TSTAT XXXX UNIT / E DRTYPE X A P F DF FS SC NR B E64 STATUS IS 0 0 0 00000 0000 0000 / 0 000010 0 0 0 1 0 0 0 0 0 SHOULD BE 1 0 0 00000 XXXX XXXX / 0 000010 0 0 0 X 0 0 0 0 0 H137 TERMINATION STATUS IS "NORMAL COMPLET" START 0016/00/33-LAST 0016/00/34 WORD COUNT 00128,OLD CYL 0016,UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 14275 (ISZ 263) Resuming from error. Expect message "H65 SHORT PASS 0001,HEAD 01 ,UNIT 0,0015 ERRORS-0015 SOFT" H65 SHORT PASS 0001,HEAD 01 ,UNIT 0,0015 ERRORS-0015 SOFT ------------------------------------------------- DSN 112200 - 9-Track Magnetic Tape (7970B, 13181) ------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 112200. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 16213 (LDA 117) Executing the diagnostic. Expect halt 102024 for user intervention. 7970-13181 DIAG. H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102024 for user intervention. H025 BI-O COMP H025 FOR DATA CH H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect message "E135 LRCC ERROR" and halt 106035. H025 BI-O COMP H025 FOR CMND CH H154 UNIT 000000 H034 UNIT ON-LINE H155 STATUS IS 0 000 000 001 000 000 H154 UNIT 000001 H034 UNIT ON-LINE H155 STATUS IS 0 000 000 001 000 000 H154 UNIT 000002 H034 UNIT ON-LINE H155 STATUS IS 0 000 000 001 000 000 H154 UNIT 000003 H034 UNIT ON-LINE H155 STATUS IS 0 000 000 001 000 000 H154 UNIT 000000 H102 RECORD 000116 H054 COMMAND 000061 H155 STATUS IS 0 000 000 000 000 000 H155 AND SHOULD BE 0 000 000 000 000 000 TEST 23 E135 LRCC ERROR Programmed halt, T: 106035 (HLT 35), P: 02151 (JMP 2137,I) Resuming from error. Expect message "E141 CRCC ERROR" and halt 106041. H154 UNIT 000000 H102 RECORD 000116 H054 COMMAND 000061 H155 STATUS IS 0 000 000 000 000 000 H155 AND SHOULD BE 0 000 000 000 000 000 E141 CRCC ERROR Programmed halt, T: 106041 (HLT 41), P: 02151 (JMP 2137,I) Resuming from error. Expect halt 106026 for user intervention. H126 EXCHANGE REELS Programmed halt, T: 106026 (HLT 26), P: 02136 (JMP 2127,I) [Reels exchanged, RUN pressed] Expect halt 106027 for user intervention. H127 SET SW 13 TO LOOP Programmed halt, T: 106027 (HLT 27), P: 02136 (JMP 2127,I) [RUN pressed] Expect halt 106030 for user intervention. H130 REMOVE WRITE RING Programmed halt, T: 106030 (HLT 30), P: 02136 (JMP 2127,I) [Write ring removed, RUN pressed] Expect halt 106031 for user intervention. H131 REPLACE WRITE RING Programmed halt, T: 106031 (HLT 31), P: 02136 (JMP 2127,I) [Write ring replaced, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 0 on-line, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 1 on-line, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 2 on-line, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 3 on-line, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------------------------- DSN 112200 - 9-Track Magnetic Tape (7970E, 13183) ------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 112200. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 16213 (LDA 117) Executing the diagnostic. Expect halt 102024 for user intervention. 7970-13183 DIAG. H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102024 for user intervention. H025 BI-O COMP H025 FOR DATA CH H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 106026 for user intervention. H025 BI-O COMP H025 FOR CMND CH H154 UNIT 000000 H034 UNIT ON-LINE H155 STATUS IS 1 000 000 001 000 000 H154 UNIT 000001 H034 UNIT ON-LINE H155 STATUS IS 1 010 000 001 000 000 H154 UNIT 000002 H034 UNIT ON-LINE H155 STATUS IS 1 100 000 001 000 000 H154 UNIT 000003 H034 UNIT ON-LINE H155 STATUS IS 1 110 000 001 000 000 H126 EXCHANGE REELS Programmed halt, T: 106026 (HLT 26), P: 02136 (JMP 2127,I) [Reels exchanged, RUN pressed] Expect halt 106027 for user intervention. H127 SET SW 13 TO LOOP Programmed halt, T: 106027 (HLT 27), P: 02136 (JMP 2127,I) [RUN pressed] Expect halt 106030 for user intervention. H130 REMOVE WRITE RING Programmed halt, T: 106030 (HLT 30), P: 02136 (JMP 2127,I) [Write ring removed, RUN pressed] Expect halt 106031 for user intervention. H131 REPLACE WRITE RING Programmed halt, T: 106031 (HLT 31), P: 02136 (JMP 2127,I) [Write ring replaced, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 0 on-line, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 1 on-line, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 2 on-line, RUN pressed] Expect halt 106037 for user intervention. H137 PUT TAPE UNIT ON-LINE Programmed halt, T: 106037 (HLT 37), P: 02136 (JMP 2127,I) [Unit 3 on-line, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------------ DSN 146200 - Paper Tape Reader/Punch ------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 146200. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02431 (JMP 2000) Selecting the test set. Expect halt 102075 if successful. PAPER TAPE READER AND PUNCH DIAGNOSTIC DSN 146200 Programmed halt, T: 102075 (HLT 75), P: 02026 (STA 2253) Punching the loop tape needed for tests 3, 4, and 11. Expect halt 102060 for user intervention. H060 TO MAKE LOOP, PUNCH ON AND RUN Programmed halt, T: 102060 (HLT 60), P: 02135 (JMP 2126,I) [Punch on, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2251) Selecting the test set. Expect halt 102075 if successful. PAPER TAPE READER AND PUNCH DIAGNOSTIC DSN 146200 Programmed halt, T: 102075 (HLT 75), P: 02026 (STA 2253) Executing the diagnostic. Expect halt 102024 for user intervention. H050 BI-O ON PUNCH H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03260 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102024 for user intervention. H025 BI-O COMP H055 BI-O ON READER H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03260 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102051 for user intervention. H025 BI-O COMP H051 ALL CHARTR COMBINATIONS, PUNCH ONLY TURN PUNCH ON, PRESS RUN Programmed halt, T: 102051 (HLT 51), P: 02135 (JMP 2126,I) [Punch on, RUN pressed] Expect halt 102052 for user intervention. H052 ALL CHARTR COMBINATIONS, VERIFY TEAR TAPE AT PUNCH, PLACE IN READER, PRESS RUN Programmed halt, T: 102052 (HLT 52), P: 02135 (JMP 2126,I) [Tape in reader, RUN pressed] Expect halt 102054 for user intervention. H054 PLACE LOOP IN READER-PRESS RUN TO START READ, SET BIT0 TO 1 TO EXIT TEST, SET BIT0 TO 0 Programmed halt, T: 102054 (HLT 54), P: 02135 (JMP 2126,I) [Loop in reader, Bit 0 set, RUN pressed] [Bit 0 cleared] Expect halt 102054 for user intervention. H054 PLACE LOOP IN READER-PRESS RUN TO START READ, SET BIT0 TO 1 TO EXIT TEST, SET BIT0 TO 0 Programmed halt, T: 102054 (HLT 54), P: 02135 (JMP 2126,I) [Loop in reader, Bit 0 set, RUN pressed] [Bit 0 cleared] Expect halt 102056 for user intervention. H056 TURN PUNCH ON, PRESS RUN. PUNCH ROUTINE WILL START. LOAD THE TAPE BEING PUNCHED INTO THE READER. TO START READ, SET BIT0 TO 1 TO EXIT, SET BIT0 TO 0 Programmed halt, T: 102056 (HLT 56), P: 02135 (JMP 2126,I) [Punch on, Bit 0 cleared, RUN pressed] [Tape in reader, Bit 0 set] [Bit 0 cleared] Expect halt 102057 for user intervention. H057 TO COMPLETE, TEAR TAPE, PRESS RUN Programmed halt, T: 102057 (HLT 57), P: 02135 (JMP 2126,I) [Tape torn, RUN pressed] Expect halt 102063 for user intervention. H063 READER SPEED TEST. PLACE LOOP IN READER BIT 5=0 FOR 2748-58, BIT 5=1 FOR 2737. PRESS RUN. Programmed halt, T: 102063 (HLT 63), P: 02135 (JMP 2126,I) [Loop in reader, Bit 5 cleared, RUN pressed] Expect halt 106000 for user intervention. H066 TEST 11 COMPLETE H100 PUNCH SPEED TEST. BIT 6=0 FOR 2895 OR BIT 6=1 FOR 2753-PRESS RUN Programmed halt, T: 106000 (HLT 0), P: 02135 (JMP 2126,I) [Punch ready, Bit 6 cleared, RUN pressed] Expect halt 102077 for successful completion. H103 TEST 12 COMPLETE PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02117 (LDA 2251) ------------------------------------ DSN 145103 - 2613/17/18 Line Printer ------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 145103. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02430 (JMP 2000) --------------------------------- HP 2613 Line Printer Verification --------------------------------- Executing the diagnostic. Expect halt 102024 for user intervention. 2613-2618 LINE PRINTER DIAG H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03333 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102040 for user intervention. H025 BI-O COMP H040 PWR OFF LP,PRESS RUN Programmed halt, T: 102040 (HLT 40), P: 02136 (JMP 2127,I) [Power off, RUN pressed] Expect halt 102041 for user intervention. H041 PWR ON, ON LINE LP,PRESS RUN Programmed halt, T: 102041 (HLT 41), P: 02136 (JMP 2127,I) [Power on, RUN pressed] Expect halt 102042 for user intervention. H042 LP TO OFF LINE,PRESS RUN Programmed halt, T: 102042 (HLT 42), P: 02136 (JMP 2127,I) [OFFLINE pressed, RUN pressed] Expect halt 102043 for user intervention. H043 LP TO ON LINE,PRESS RUN Programmed halt, T: 102043 (HLT 43), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102044 for user intervention. H044 OPEN DRUM GATE,PRESS RUN Programmed halt, T: 102044 (HLT 44), P: 02136 (JMP 2127,I) [Drum gate open, RUN pressed] Expect halt 102045 for user intervention. H046 REMOVE PAPER,CLOSE DRUM GATE,PRESS RUN Programmed halt, T: 102046 (HLT 46), P: 02136 (JMP 2127,I) [Paper removed, drum gate closed, RUN pressed] Expect halt 102047 for user intervention. H047 RESTORE PAPER, ON LINE LP, PRESS RUN Programmed halt, T: 102047 (HLT 47), P: 02136 (JMP 2127,I) [Paper restored, ONLINE pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) --------------------------------- HP 2617 Line Printer Verification --------------------------------- Executing the diagnostic. Expect halt 102024 for user intervention. 2613-2618 LINE PRINTER DIAG H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03333 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102040 for user intervention. H025 BI-O COMP H040 PWR OFF LP,PRESS RUN Programmed halt, T: 102040 (HLT 40), P: 02136 (JMP 2127,I) [Power off, RUN pressed] Expect halt 102041 for user intervention. H041 PWR ON, ON LINE LP,PRESS RUN Programmed halt, T: 102041 (HLT 41), P: 02136 (JMP 2127,I) [Power on, RUN pressed] Expect halt 102042 for user intervention. H042 LP TO OFF LINE,PRESS RUN Programmed halt, T: 102042 (HLT 42), P: 02136 (JMP 2127,I) [OFFLINE pressed, RUN pressed] Expect halt 102043 for user intervention. H043 LP TO ON LINE,PRESS RUN Programmed halt, T: 102043 (HLT 43), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102044 for user intervention. H044 OPEN DRUM GATE,PRESS RUN Programmed halt, T: 102044 (HLT 44), P: 02136 (JMP 2127,I) [Drum gate open, RUN pressed] Expect halt 102045 for user intervention. H046 REMOVE PAPER,CLOSE DRUM GATE,PRESS RUN Programmed halt, T: 102046 (HLT 46), P: 02136 (JMP 2127,I) [Paper removed, drum gate closed, RUN pressed] Expect halt 102047 for user intervention. H047 RESTORE PAPER, ON LINE LP, PRESS RUN Programmed halt, T: 102047 (HLT 47), P: 02136 (JMP 2127,I) [Paper restored, ONLINE pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) --------------------------------- HP 2618 Line Printer Verification --------------------------------- Executing the diagnostic. Expect halt 102024 for user intervention. 2613-2618 LINE PRINTER DIAG H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03333 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102040 for user intervention. H025 BI-O COMP H040 PWR OFF LP,PRESS RUN Programmed halt, T: 102040 (HLT 40), P: 02136 (JMP 2127,I) [Power off, RUN pressed] Expect halt 102041 for user intervention. H041 PWR ON, ON LINE LP,PRESS RUN Programmed halt, T: 102041 (HLT 41), P: 02136 (JMP 2127,I) [Power on, RUN pressed] Expect halt 102042 for user intervention. H042 LP TO OFF LINE,PRESS RUN Programmed halt, T: 102042 (HLT 42), P: 02136 (JMP 2127,I) [OFFLINE pressed, RUN pressed] Expect halt 102043 for user intervention. H043 LP TO ON LINE,PRESS RUN Programmed halt, T: 102043 (HLT 43), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102044 for user intervention. H044 OPEN DRUM GATE,PRESS RUN Programmed halt, T: 102044 (HLT 44), P: 02136 (JMP 2127,I) [Drum gate open, RUN pressed] Expect halt 102045 for user intervention. H046 REMOVE PAPER,CLOSE DRUM GATE,PRESS RUN Programmed halt, T: 102046 (HLT 46), P: 02136 (JMP 2127,I) [Paper removed, drum gate closed, RUN pressed] Expect halt 102047 for user intervention. H047 RESTORE PAPER, ON LINE LP, PRESS RUN Programmed halt, T: 102047 (HLT 47), P: 02136 (JMP 2127,I) [Paper restored, ONLINE pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------ DSN 105102 - 2607 Line Printer ------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 105102. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02441 (JMP 2000) Selecting the test set. Expect halt 102075 if successful. 2607 LINE PRINTER DIAGNOSTIC Programmed halt, T: 102075 (HLT 75), P: 02022 (AND 143) Executing the diagnostic. Expect halt 102024 for user intervention. H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03261 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102040 for user intervention. H025 BI-O COMP H040 PWR OFF LP,PRESS RUN Programmed halt, T: 102040 (HLT 40), P: 02140 (JMP 2131,I) [Power off, RUN pressed] Expect halt 102041 for user intervention. H041 PWR ON LP,READY LP,PRESS RUN Programmed halt, T: 102041 (HLT 41), P: 02140 (JMP 2131,I) [Power on, RUN pressed] Expect halt 102042 for user intervention. H042 PRINT SW OFF,PRESS RUN Programmed halt, T: 102042 (HLT 42), P: 02140 (JMP 2131,I) [PRINT off, RUN pressed] Expect halt 102043 for user intervention. H043 PRINT SW ON,PRESS RUN Programmed halt, T: 102043 (HLT 43), P: 02140 (JMP 2131,I) [PRINT on, RUN pressed] Expect halt 102044 for user intervention. H044 OPEN PLATEN,PRESS RUN Programmed halt, T: 102044 (HLT 44), P: 02140 (JMP 2131,I) [Platen open, RUN pressed] Expect halt 102045 for user intervention. H045 CLOSE PLATEN,PRESS RUN Programmed halt, T: 102045 (HLT 45), P: 02140 (JMP 2131,I) [Platen closed, RUN pressed] Expect halt 102046 for user intervention. H046 REMOVE PAPER FROM LP,PRESS RUN Programmed halt, T: 102046 (HLT 46), P: 02140 (JMP 2131,I) [Paper removed, RUN pressed] Expect halt 102047 for user intervention. H047 RESTORE PAPER IN LP, READY LP,PRESS RUN Programmed halt, T: 102047 (HLT 47), P: 02140 (JMP 2131,I) [Paper restored, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02122 (LDA 2251) ------------------------------ Diagnostic Configurator Reload ------------------------------ Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77756 (ALF,ALF) Verifying DSN 000200. Configuring the diagnostic configurator for paper tape loading. Expect halt 106074 if successful. Programmed halt, T: 106074 (HLT 74), P: 77535 (JMP 77466) ------------------------------------------------- DSN 101217 - 2000/Access Comm. Processor Firmware ------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101217. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect halt 102077 for successful completion. 21MX 2000 COMPUTER SYSTEM COMM. PROC. FIRMWARE DIAGNOSTIC H030 CRC TEST H040 ENQ, DEQ AND PENQ TESTS H060 IAL TEST H110 INS,READF, SAVE AND RESTR TESTS H120 LAI AND SAI TESTS H130 PFREX TEST H140 PFREI TEST H150 PFRIO TEST PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------------------------ DSN 177777 - HP 2100 Fixed Head Disc/Drum (2770) ------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 177777. Initializing the diagnostic. Expect halt 107001 for user intervention. H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN Programmed halt, T: 107001 (HLT 1,C), P: 12004 (LIA 1) Configuring the diagnostic. Expect halt 107077 for user intervention. H1 CONFIGURATION COMPLETE H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN Programmed halt, T: 107077 (HLT 77,C), P: 12356 (JMP 130) Executing the diagnostic. Expect halt 102002 for user intervention. H12 DEVICE HAS 90 SECTORS H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02166 (LDA 363) [Tracks unprotected, RUN pressed] Expect halt 102002 for user intervention. H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02275 (JSB 774) [Tracks protected, RUN pressed] Expect halt 102002 for user intervention. H14 DEVICE HAS 0032 TRACKS,THE FOLLOWING ARE PROTECTED: H63 0000 TO 0007 H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02403 (LDA 365) [Tracks unprotected, RUN pressed] Expect halt 102077 for successful completion. H36 PASS 0001 Programmed halt, T: 102077 (HLT 77), P: 02646 (JMP 131,I) ---------------------------------------------------- DSN 177777 - HP 2100 Fixed Head Disc/Drum (2771-001) ---------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 177777. Initializing the diagnostic. Expect halt 107001 for user intervention. H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN Programmed halt, T: 107001 (HLT 1,C), P: 12004 (LIA 1) Configuring the diagnostic. Expect halt 107077 for user intervention. H1 CONFIGURATION COMPLETE H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN Programmed halt, T: 107077 (HLT 77,C), P: 12356 (JMP 130) Executing the diagnostic. Expect halt 102002 for user intervention. H12 DEVICE HAS 90 SECTORS H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02166 (LDA 363) [Tracks unprotected, RUN pressed] Expect halt 102002 for user intervention. H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02275 (JSB 774) [Tracks protected, RUN pressed] Expect halt 102002 for user intervention. H14 DEVICE HAS 0128 TRACKS,THE FOLLOWING ARE PROTECTED: H63 0000 TO 0031 H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02403 (LDA 365) [Tracks unprotected, RUN pressed] Expect halt 102077 for successful completion. H36 PASS 0001 Programmed halt, T: 102077 (HLT 77), P: 02646 (JMP 131,I) ------------------------------------------------ DSN 177777 - HP 2100 Fixed Head Disc/Drum (2773) ------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 177777. Initializing the diagnostic. Expect halt 107001 for user intervention. H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN Programmed halt, T: 107001 (HLT 1,C), P: 12004 (LIA 1) Configuring the diagnostic. Expect halt 107077 for user intervention. H1 CONFIGURATION COMPLETE H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN Programmed halt, T: 107077 (HLT 77,C), P: 12356 (JMP 130) Executing the diagnostic. Expect halt 102002 for user intervention. H12 DEVICE HAS 32 SECTORS H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02166 (LDA 363) [Tracks unprotected, RUN pressed] Expect halt 102002 for user intervention. H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02275 (JSB 774) [Tracks protected, RUN pressed] Expect halt 102002 for user intervention. H14 DEVICE HAS 0192 TRACKS,THE FOLLOWING ARE PROTECTED: H63 0000 TO 0015 H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02403 (LDA 365) [Tracks unprotected, RUN pressed] Expect halt 102077 for successful completion. H36 PASS 0001 Programmed halt, T: 102077 (HLT 77), P: 02646 (JMP 131,I) ------------------------------------------------ DSN 177777 - HP 2100 Fixed Head Disc/Drum (2775) ------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 177777. Initializing the diagnostic. Expect halt 107001 for user intervention. H0 2100 SERIES FIXED HEAD DISC/DRUM DIAGNOSTIC ENTER SELECT CODES, CHANNELS IN SWITCH REGISTER,PUSH RUN Programmed halt, T: 107001 (HLT 1,C), P: 12004 (LIA 1) Configuring the diagnostic. Expect halt 107077 for user intervention. H1 CONFIGURATION COMPLETE H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, H70 ENTER PROGRAM OPTIONS IN SWITCH REGISTER, PUSH RUN Programmed halt, T: 107077 (HLT 77,C), P: 12356 (JMP 130) Executing the diagnostic. Expect halt 102002 for user intervention. H12 DEVICE HAS 32 SECTORS H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02166 (LDA 363) [Tracks unprotected, RUN pressed] Expect halt 102002 for user intervention. H10 SET TRACK PROTECT SWITCH TO PROTECTED,PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02275 (JSB 774) [Tracks protected, RUN pressed] Expect halt 102002 for user intervention. H14 DEVICE HAS 0768 TRACKS,THE FOLLOWING ARE PROTECTED: H63 0000 TO 0063 H11 SET TRACK PROTECT SWITCH TO NOT PROTECTED, PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02403 (LDA 365) [Tracks unprotected, RUN pressed] Expect halt 102077 for successful completion. H36 PASS 0001 Programmed halt, T: 102077 (HLT 77), P: 02646 (JMP 131,I) ----------------------------------------------- DSN (none) - 12875 Processor Interconnect Cable ----------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Configuring the diagnostic. Expect halt 107076 if successful. Programmed halt, T: 107076 (HLT 76,C), P: 00362 (LIA 1) Selecting the test set. Expect halt 107077 if successful. Programmed halt, T: 107077 (HLT 77,C), P: 00365 (LDB 230) Executing the diagnostic. Expect halt 102077 for successful completion. H14. START 12875 CABLE DIAGNOSTIC H77. END 12875 CABLE DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 00564 (JMP 365) ------------------------- HP 2100 Diagnostics Suite ------------------------- Reconfiguring the CPU as a 2100 with 32K. Loading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for magnetic tape loading. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) ---------------------------------------- DSN 102200 - Core Memory (2100/16/15/14) ---------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 102200. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 00360 (JMP 100) --------------------------- DSN 102001 - Memory Protect --------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 102001. Executing the diagnostic. Expect halt 102007 for user intervention. HP 2100 SERIES MEMORY PROTECT DIAGNOSTIC H07. PRESS PRESET (EXT/INT), RUN Programmed halt, T: 102007 (HLT 7), P: 02163 (SFS 11) [PRESET pressed, RUN pressed] Expect message "H13. PRESS HALT, PRESET(INT), RUN IN LESS THAN 15 SEC." H13. PRESS HALT, PRESET(INT), RUN IN LESS THAN 15 SEC. [PRESET pressed, RUN pressed] Expect halt 102077 for normal completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 03547 (JMP 2050) ------------------------------------------- DSN 143000 - General Purpose Register (LPS) ------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 143000. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02421 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. GENERAL PURPOSE REGISTER DIAGNOSTIC H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03247 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H025 BI-O COMP PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02115 (LDA 2244) -------------------------------------------------------------- DSN 101220 - Direct Memory Access/Dual-Channel Port Controller -------------------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101220. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 01541 (CLC 0,C) Executing the diagnostic. Expect halt 107024 for user intervention. DMA-DCPC DIAGNOSTIC H324 PRESS PRESET AND RUN Programmed halt, T: 107024 (HLT 24,C), P: 02312 (SFC 6) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 01671 (CLB) -------------------------------------- DSN 101110 - 2100 Fast FORTRAN Package -------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101110. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02426 (JMP 2000) Executing the diagnostic. Expect message "E142 NOT INTERRUPTIBLE" and halt 106042. START 2100A-S FFP DIAGNOSTIC H030 .GOTO TEST H050 .ENTR TEST H060 .ENTP TEST H100 .SETP TEST H110 ..MAP TEST H120 SNGL TEST H130 DBLE TEST H140 .XADD TEST TEST 07 E142 NOT INTERRUPTIBLE Programmed halt, T: 106042 (HLT 42), P: 02151 (JMP 2137,I) Resuming from error. Expect message "E162 NOT INTERRUPTIBLE" and halt 106062. H150 .XSUB TEST H160 .XMPY TEST TEST 11 E162 NOT INTERRUPTIBLE Programmed halt, T: 106062 (HLT 62), P: 02151 (JMP 2137,I) Resuming from error. Expect halt 102077 for successful completion. H200 .XDIV TEST H210 .DFER TEST H220 .XFER TEST PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------------------------- DSN 101016 - 2000/Access Comm. Processor Firmware ------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 101016. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect message "E165 TRSLT NOT INTERRUPTIBLE" and halt 106065. 2100 2000-ACCESS COMM. PROC. FIRMWARE DIAGNOSTIC H030 CRC TEST H040 ENQ, DEQ AND PENQ TESTS H060 IAL TEST H110 READF, SAVE AND RESTR TESTS H120 LAI AND SAI TESTS H130 PFREX TEST H140 PFREI TEST H150 PFRIO TEST H160 STORE-LOAD BYTE, TRSLT AND BYTE MOVE TEST TEST 10 E165 TRSLT NOT INTERRUPTIBLE Programmed halt, T: 106065 (HLT 65), P: 02151 (JMP 2137,I) Resuming from error. Expect message "E234 WORD MOVE NOT INTERRUPTIBLE" and halt 103034. H230 WORD MOVE TEST TEST 11 E234 WORD MOVE NOT INTERRUPTIBLE Programmed halt, T: 103034 (HLT 34,C), P: 02151 (JMP 2137,I) Resuming from error. Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ------------------------------ DSN 105101 - 2767 Line Printer ------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 105101. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 02425 (JMP 2000) Executing the diagnostic. Expect halt 102024 for user intervention. 2767 L.P. DIAGNOSTIC H024 PRESS PRESET (EXT&INT),RUN Programmed halt, T: 102024 (HLT 24), P: 03254 (CLA,INA) [PRESET pressed, RUN pressed] Expect halt 102035 for user intervention. H025 BI-O COMP H035 TURN OFF L.P. POWER Programmed halt, T: 102035 (HLT 35), P: 02136 (JMP 2127,I) [Power off, RUN pressed] Expect halt 102036 for user intervention. H036 TURN ON L.P. POWER Programmed halt, T: 102036 (HLT 36), P: 02136 (JMP 2127,I) [Power on, RUN pressed] Expect halt 102033 for user intervention. H033 PUT L.P. ON-LINE Programmed halt, T: 102033 (HLT 33), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102034 for user intervention. H034 MASTER CLEAR L.P. Programmed halt, T: 102034 (HLT 34), P: 02136 (JMP 2127,I) [Master clear pressed, RUN pressed] Expect halt 102033 for user intervention. H033 PUT L.P. ON-LINE Programmed halt, T: 102033 (HLT 33), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102040 for user intervention. H040 PUT L.P. OFF-LINE. TOGGLE TOP-OF-FORM SWITCH Programmed halt, T: 102040 (HLT 40), P: 02136 (JMP 2127,I) [OFFLINE pressed, TOF toggled, RUN pressed] Expect halt 102033 for user intervention. H033 PUT L.P. ON-LINE Programmed halt, T: 102033 (HLT 33), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102041 for user intervention. H041 PUT L.P. OFF-LINE. TOGGLE PAPER-STEP 5 TIMES Programmed halt, T: 102041 (HLT 41), P: 02136 (JMP 2127,I) [OFFLINE pressed, PAPER STEP toggled, RUN pressed] Expect halt 102033 for user intervention. H033 PUT L.P. ON-LINE Programmed halt, T: 102033 (HLT 33), P: 02136 (JMP 2127,I) [ONLINE pressed, RUN pressed] Expect halt 102077 for successful completion. PASS 000001 Programmed halt, T: 102077 (HLT 77), P: 02120 (LDA 2247) ----------------------------------------------------- DSN 111001 - HP2100A Disc File (2883) (multiple unit) ----------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 111001. Initializing the diagnostic. Expect halt 107001 for user intervention. H0 HP 2100 SERIES DISC FILE(2883) DIAGNOSTIC H72 ENTER SELECT CODES,DMA CHANNEL IN SWITCH REGISTER,PRESS RUN Programmed halt, T: 107001 (HLT 1,C), P: 12006 (LIA 1) Configuring the diagnostic. Expect halt 107077 for user intervention. H1 ENTER PROGRAM OPTIONS IN SWITCH REGISTER,PRESS RUN Programmed halt, T: 107077 (HLT 77,C), P: 12100 (JMP 130) Executing the diagnostic. Expect message "H65 PASS 0002" H65 PASS 0001 H65 PASS 0002 -------------------------------------------------------- DSN 111001 - HP2100A Disc File (2883) (user interaction) -------------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Verifying DSN 111001. Initializing the diagnostic. Expect halt 107001 for user intervention. H0 HP 2100 SERIES DISC FILE(2883) DIAGNOSTIC H72 ENTER SELECT CODES,DMA CHANNEL IN SWITCH REGISTER,PRESS RUN Programmed halt, T: 107001 (HLT 1,C), P: 12006 (LIA 1) Configuring the diagnostic. Expect halt 107077 for user intervention. H1 ENTER PROGRAM OPTIONS IN SWITCH REGISTER,PRESS RUN Programmed halt, T: 107077 (HLT 77,C), P: 12100 (JMP 130) Executing the diagnostic. Expect halt 102002 for user intervention. H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02441 (LDA 375) [RUN pressed] Expect message "E47 DATA WORD 0000 IS 000000 SHOULD BE 100000" and halt 102001. H37 READ ADDRESS IN S0 E47 DATA WORD 0000 IS 000000 SHOULD BE 100000 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0002 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect message "E47 DATA WORD 0000 IS 000000 SHOULD BE 100001" and halt 102001. H37 READ ADDRESS IN S0 E47 DATA WORD 0000 IS 000000 SHOULD BE 100001 H51 CYL 0001 HEAD 01 SECTOR 00 WORD COUNT 0002 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000031" and halt 102001. H33 WRITE DEFECTIVE TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000031 H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000031" and halt 102001. H41 READ DEFECTIVE TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000031 H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect halt 102002 for user intervention. H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02533 (LDA 327) [RUN pressed] Expect message "E64 STATUS IS 000000 SHOULD BE 000031" and halt 102001. H33 WRITE DEFECTIVE TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000031 H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000031" and halt 102001. H41 READ DEFECTIVE TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000031 H51 CYL 0000 HEAD 01 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000011" and halt 102001. H42 WRITE PROTECTED TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000011 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000011" and halt 102001. H36 WRITE ADDRESS IN S0 E64 STATUS IS 000000 SHOULD BE 000011 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0046 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01204 (JMP 1170,I) Resuming from error. Expect halt 102002 for user intervention. H66 SET FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02614 (CLA) [RUN pressed] Expect halt 102002 for user intervention. H67 CLEAR FORMAT SWITCH ON UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02646 (JSB 1160) [RUN pressed] Expect halt 102002 for user intervention. H70 DISABLE UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02654 (LDA 326) [Unit disabled, RUN pressed] Expect message "H40 ENABLE UNIT 0". H40 ENABLE UNIT 0 [Unit enabled] Expect halt 102002 for user intervention. H71 PRESS PRESET THEN PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 02741 (JSB 770) [PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H74 SHORT PASS H65 PASS 0001 Programmed halt, T: 102077 (HLT 77), P: 02223 (CLA) ------------------------------ Diagnostic Configurator Reload ------------------------------ Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for paper tape loading. Expect halt 106074 if successful. Programmed halt, T: 106074 (HLT 74), P: 77535 (JMP 77466) ------------------------------------------------- DSN (none) - HP 24195 Direct Memory Access (2100) ------------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Configuring the diagnostic. Expect halt 107076 if successful. Programmed halt, T: 107076 (HLT 76,C), P: 01153 (LIA 1) Selecting the test set. Expect halt 107077 if successful. Programmed halt, T: 107077 (HLT 77,C), P: 01156 (JMP 100) Executing the diagnostic. Expect halt 102027 for user intervention. H0. START DMA DIAGNOSTIC Programmed halt, T: 102027 (HLT 27), P: 01663 (SFS 6) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H77. END DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 03524 (JMP 100) ----------------------------------------------------------------- DSN (none) - HP2100A Cartridge Disc Memory (2870) (multiple unit) ----------------------------------------------------------------- Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77755 (NOP) Verifying DSN 000200. Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Configuring the diagnostic. Expect halt 107077 if successful. Programmed halt, T: 107077 (HLT 77,C), P: 12060 (JMP 100) Configuring the test parameters. Expect message "H33 RESET SWITCH 8" and halt 102002 for user intervention. H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC H34 ENTER UNIT NUMBERS(0-3)SEPARATED BY COMMAS 0,1,2,3 H33 RESET SWITCH 8 Programmed halt, T: 102002 (HLT 2), P: 02356 (JSB 1122) [Switch 8 reset, switch 2 set, RUN pressed] Expect message "H32 RESET SWITCH 2" and halt 102002 for user intervention. H24 CYLINDER TABLE 000,001,002,004,008,016,032,064,128,202 H25 WISH TO ALTER TABLE? NO H27 PATTERN TABLE 000000 177777 125252 052525 007417 170360 162745 163346 155555 022222 H25 WISH TO ALTER TABLE? NO H62 TYPE A FOR HEADS 0,1;B FOR 2,3;C FOR ALTERNATELY 0,1 THEN 2,3 C H32 RESET SWITCH 2 Programmed halt, T: 102002 (HLT 2), P: 02261 (JSB 1122) [Switch 2 reset, RUN pressed] Executing the diagnostic. Expect message "H65 PASS 0004" H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC H65 PASS 0001 H65 PASS 0002 H65 PASS 0003 H65 PASS 0004 -------------------------------------------------------------------- DSN (none) - HP2100A Cartridge Disc Memory (2870) (user interaction) -------------------------------------------------------------------- Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77755 (NOP) Verifying DSN 000200. Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Configuring the diagnostic. Expect halt 107077 if successful. Programmed halt, T: 107077 (HLT 77,C), P: 12060 (JMP 100) Executing the diagnostic. Expect halt 102002 for user interaction. H0 HP2100A CARTRIDGE DISC MEMORY DIAGNOSTIC H66 SET OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02610 (LDA 361) [RUN pressed] Expect message "E64 STATUS IS 000000 SHOULD BE 000010" and halt 102001. H37 READ AFTER WRITE ADDRESS IN S0 E64 STATUS IS 000000 SHOULD BE 000010 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01165 (JMP 1151,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000010" and halt 102001. H22 CYCLIC CHECK IN S0 E64 STATUS IS 000000 SHOULD BE 000010 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01165 (JMP 1151,I) Resuming from error. Expect halt 102002 for user intervention. H67 CLEAR OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02657 (CLA) [RUN pressed] Expect message "E64 STATUS IS 000000 SHOULD BE 000031" and halt 102001. H41 READ DEFECTIVE TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000031 H51 CYL 0001 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01165 (JMP 1151,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000011" and halt 102001. H42 WRITE PROTECTED TRACK IN S0 E64 STATUS IS 000000 SHOULD BE 000011 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 0128 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01165 (JMP 1151,I) Resuming from error. Expect message "E64 STATUS IS 000000 SHOULD BE 000011" and halt 102001. H36 WRITE ADDRESS IN S0 E64 STATUS IS 000000 SHOULD BE 000011 H51 CYL 0000 HEAD 00 SECTOR 00 WORD COUNT 3072 UNIT 00 Programmed halt, T: 102001 (HLT 1), P: 01165 (JMP 1151,I) Resuming from error. Expect halt 102002 for user intervention. H66 SET OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02741 (CLA) [RUN pressed] Expect halt 102002 for user intervention. H67 CLEAR OVERRIDE SWITCH,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 02772 (LDA 243) [RUN pressed] Expect halt 102002 for user intervention. H70 UNLOCK UNIT 0,PUSH RUN Programmed halt, T: 102002 (HLT 2), P: 03005 (LDA 321) [Unit unlocked, RUN pressed] Expect message "H40 READY UNIT 0". H40 READY UNIT 0 [Unit readied] Expect halt 102002 for user intervention. H71 PRESS PRESET THEN PRESS RUN Programmed halt, T: 102002 (HLT 2), P: 03115 (JSB 734) [PRESET pressed, RUN pressed] Expect message "H65 PASS 0001" H65 PASS 0001 ------------------------------------------------- DSN (none) - HP 12584A-01 Teleprinter Multiplexer ------------------------------------------------- Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77755 (NOP) Verifying DSN 000200. Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 77237 (JMP 100) Configuring the diagnostic. Expect halts 107074 and 107077 if successful. Programmed halt, T: 107074 (HLT 74,C), P: 01034 (LIA 1) Programmed halt, T: 107077 (HLT 77,C), P: 01037 (CLC 0,C) Executing the diagnostic. Expect halt 102000 for user intervention. Programmed halt, T: 102000 (HLT 0), P: 01277 (SFS 47) [PRESET pressed, RUN pressed] Expect halt 102037 for user intervention. Programmed halt, T: 102037 (HLT 37), P: 01326 (CLA) Test connector installed. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 01516 (JMP 1515) --------------------------------------------- DSN (none) - HP 12584A-02 Dataset Multiplexer --------------------------------------------- Reonfiguring the diagnostic. Expect halts 107074 and 107077 if successful. Programmed halt, T: 107074 (HLT 74,C), P: 01034 (LIA 1) Programmed halt, T: 107077 (HLT 77,C), P: 01037 (CLC 0,C) Executing the diagnostic. Expect halt 102000 for user intervention. Programmed halt, T: 102000 (HLT 0), P: 01277 (SFS 50) [PRESET pressed, RUN pressed] Expect halt 102037 for user intervention. Programmed halt, T: 102037 (HLT 37), P: 01326 (CLA) Test connector installed. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 01516 (JMP 1515) ------------------------- HP 2116 Diagnostics Suite ------------------------- Reconfiguring the CPU as a 2116 with 16K. Loading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for magnetic tape loading. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) ---------------------------------------- DSN 102200 - Core Memory (2100/16/15/14) ---------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) Verifying DSN 102200. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 00360 (JMP 100) ---------------------------------------------- DSN 101105 - Direct Memory Access (2114/15/16) ---------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) Verifying DSN 101105. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 01235 (CLC 0,C) Executing the diagnostic. Expect halt 102027 for user intervention. H0. START DMA DIAGNOSTIC Programmed halt, T: 102027 (HLT 27), P: 01755 (SFS 6) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H77. END DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 04335 (JMP 131) ------------------------------ Diagnostic Configurator Reload ------------------------------ Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for paper tape loading. Expect halt 106074 if successful. Programmed halt, T: 106074 (HLT 74), P: 37535 (JMP 37466) ------------------------------------------------------ DSN (none) - HP 24185 Direct Memory Access (2115/2116) ------------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) Configuring the diagnostic. Expect halt 107076 if successful. Programmed halt, T: 107076 (HLT 76,C), P: 01144 (LIA 1) Selecting the test set. Expect halt 107077 if successful. Programmed halt, T: 107077 (HLT 77,C), P: 01147 (JMP 100) Executing the diagnostic. Expect halt 102027 for user intervention. H0. START DMA DIAGNOSTIC Programmed halt, T: 102027 (HLT 27), P: 01654 (SFS 6) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H77. END DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 04263 (JMP 100) ------------------------- HP 2115 Diagnostics Suite ------------------------- Reconfiguring the CPU as a 2115 with 8K. Loading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 17755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for magnetic tape loading. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 17237 (JMP 100) ---------------------------------------- DSN 102200 - Core Memory (2100/16/15/14) ---------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 17237 (JMP 100) Verifying DSN 102200. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 00360 (JMP 100) ---------------------------------------------- DSN 101105 - Direct Memory Access (2114/15/16) ---------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 17237 (JMP 100) Verifying DSN 101105. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 01235 (CLC 0,C) Executing the diagnostic. Expect halt 102027 for user intervention. H0. START DMA DIAGNOSTIC Programmed halt, T: 102027 (HLT 27), P: 01755 (SFS 6) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H77. END DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 04335 (JMP 131) ------------------------------ Diagnostic Configurator Reload ------------------------------ Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 17755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for paper tape loading. Expect halt 106074 if successful. Programmed halt, T: 106074 (HLT 74), P: 17535 (JMP 17466) ------------------------------------------------------ DSN (none) - HP 24185 Direct Memory Access (2115/2116) ------------------------------------------------------ Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 17237 (JMP 100) Configuring the diagnostic. Expect halt 107076 if successful. Programmed halt, T: 107076 (HLT 76,C), P: 01144 (LIA 1) Selecting the test set. Expect halt 107077 if successful. Programmed halt, T: 107077 (HLT 77,C), P: 01147 (JMP 100) Executing the diagnostic. Expect halt 102027 for user intervention. H0. START DMA DIAGNOSTIC Programmed halt, T: 102027 (HLT 27), P: 01654 (SFS 6) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H77. END DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 04263 (JMP 100) ------------------------- HP 2114 Diagnostics Suite ------------------------- Reconfiguring the CPU as a 2114 with 16K. Loading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37755 (NOP) Verifying DSN 000200. Configuring the diagnostic configurator for magnetic tape loading. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) ---------------------------------------- DSN 102200 - Core Memory (2100/16/15/14) ---------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) Verifying DSN 102200. Executing the diagnostic. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 00360 (JMP 100) ---------------------------------------------- DSN 101105 - Direct Memory Access (2114/15/16) ---------------------------------------------- Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) Verifying DSN 101105. Configuring the diagnostic. Expect halt 102074 if successful. Programmed halt, T: 102074 (HLT 74), P: 01235 (CLC 0,C) Executing the diagnostic. Expect halt 102027 for user intervention. H0. START DMA DIAGNOSTIC Programmed halt, T: 102027 (HLT 27), P: 01755 (SFS 6) [INTERNAL and EXTERNAL PRESET pressed, RUN pressed] Expect halt 102077 for successful completion. H77. END DIAGNOSTIC Programmed halt, T: 102077 (HLT 77), P: 04335 (JMP 131) ------------------------------------------------- DSN (none) - HP 12584A-01 Teleprinter Multiplexer ------------------------------------------------- Reloading the diagnostic configurator from magnetic tape. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37755 (NOP) Verifying DSN 000200. Loading the diagnostic. Expect halt 102077 if successful. Programmed halt, T: 102077 (HLT 77), P: 37237 (JMP 100) Configuring the diagnostic. Expect halts 107074 and 107077 if successful. Programmed halt, T: 107074 (HLT 74,C), P: 01034 (LIA 1) Programmed halt, T: 107077 (HLT 77,C), P: 01037 (CLC 0,C) Executing the diagnostic. Expect halt 102000 for user intervention. Programmed halt, T: 102000 (HLT 0), P: 01277 (SFS 47) [PRESET pressed, RUN pressed] Expect halt 102037 for user intervention. Programmed halt, T: 102037 (HLT 37), P: 01326 (CLA) Test connector installed. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 01600 (JMP 1577) --------------------------------------------- DSN (none) - HP 12584A-02 Dataset Multiplexer --------------------------------------------- Reonfiguring the diagnostic. Expect halts 107074 and 107077 if successful. Programmed halt, T: 107074 (HLT 74,C), P: 01034 (LIA 1) Programmed halt, T: 107077 (HLT 77,C), P: 01037 (CLC 0,C) Executing the diagnostic. Expect halt 102000 for user intervention. Programmed halt, T: 102000 (HLT 0), P: 01277 (SFS 50) [PRESET pressed, RUN pressed] Expect halt 102037 for user intervention. Programmed halt, T: 102037 (HLT 37), P: 01326 (CLA) Test connector installed. Expect halt 102077 for successful completion. Programmed halt, T: 102077 (HLT 77), P: 01600 (JMP 1577) ------------------------------ Diagnostics Suite Run Complete ------------------------------ Run ended on Mar 29, 2022 at 00:12:55 Goodbye Log file closed